Made with Summer Pixel · CC0 · 7 Aug 2026

Transparent Wooden Bridge

Edited image: Make the following two regions fully transparent (alpha=0), keeping every other pixel of the wooden hanging bridge exactly as-is: Region 1 (right side): The bridge section from approximately 81.5% to 88.4% of the image width (measured from the left edge), spanning from the horizontal deck center line down to about 15% below that center line. This removes the lower-right bridge planks and rope attachments where the bridge would meet terrain. Make these pixels completely transparent. Region 2 (left side): The bridge section from approximately 0.4% to 24.8% of the image width, spanning from just above the deck center line down to about 50% below it. This removes the lower-left bridge planks and rope attachments. Make these pixels completely transparent. The center deck, all upper ropes, the side poles, the deck surface, and all rope ties and knots must remain fully intact and unchanged. Only the two specified lower-endpoint regions should become transparent.